The company started in 2004 and, as an ISO 9001 Registered Firm, we are now big enough to cope but small enough to care.
www.unionsteel.co.uk
Wednesday 28 December 2011
Wednesday 21 December 2011
Angle Steel Bar Can Be Cut To Different Needs
Angle Steel Bars are a type of structural steel which are L shaped. Other forms include the T beam, Z shape, Channel, T shaped, Bar, Rod, Plate, and Asymmetrical I Beams.
These angle steel bars can be made out of a number of different materials each of which contain different properties and thus are used for different purposes. Carbon Steels are generally used for Structural Shapes, Pipes, Plates and Tubing. High Strength Low Alloy steels are used for the same as Carbon but also W Shapes. Corrosion Resistant High Strength is only used for Structural Shapes and plates whereas Quenched and Tempered Alloy Steels are used for Structural Plates, Plates and Boilers and Pressure Valves.
The composition of the steel involved also changes the properties of the material. Often coatings are applied to steel to attempt to increase the Critical Temperature which is the temperature in which the steel is unable to bear its load. This is very important in cases of fires where injuries to persons or items may happen as the steel will no lobger be able to provide the mechanical strenghth. The Thermal Properties of Steel vary depending on the composition of the Alloy, i.e. the substances other than iron that are used to form the steel.
The Autenizing temperature which is the temperature at which the steel becomes a crystal structure is used to compare different alloys. Pure Iron has an Autenizing temperature of 900 Centigrade, Eutectic is far lower, this has less than 1% Carbon and when more carbon is added, this temperature will increase again. When the Carbon levels are above 2.1%, the name of the substance is no longer steel but Cast Iron.
There are number of ways in which Steel can be bent including Press Brake Forming, Three Point Bending, Folding, Wiping, Rotary Bending, Elastomer Bending and Jogging. There are three types of Press Brake Forming and these are Air Bending, Bottoming and Coining and in all of these a punch provides the force required for bending the steel.
There are a number of uses for angle steel bar and they are generally Structural, the steel helps provide a force to hold items in place. Therefore it is imperative that the angle produced is so exact and various calculations are used to ensure that this is the case. There are many different companies available which are able to offer specialised cutting allowing the exact size and angle to be formed for different needs.
Wednesday 14 December 2011
Wednesday 7 December 2011
Wednesday 30 November 2011
Wednesday 23 November 2011
Wednesday 16 November 2011
Wednesday 9 November 2011
Wednesday 2 November 2011
Wednesday 26 October 2011
Wednesday 19 October 2011
Wednesday 12 October 2011
Wednesday 5 October 2011
We stock ERW Steel Tube
in more than 200 sizes of round, square, rectangle and flat sided
oval. Our range also includes seamless
tubes, pre-galvanised steel, structural
hollow section, mild
steel bar, Flat
and angle. Stock items normally delivered next day
and collections are always welcome.
Friday 30 September 2011
We can fulfil all of
your specialist steel
cutting requirements and offer you exceptional and
industry proven quality. Our experienced engineers use the latest
technology to produce the best possible results for all of our
clients both large and small, and we always ensure quality control is
maintained at each stage of the processes. Visit us
online or call 01902 881222.
Saturday 17 September 2011
What Are Seamless Tubes
Steel bars and seamlesstubes can be used for various things. They are regularly used in the process of exchanging liquids. A wide range of fluids may flow through these bars and tubes. Most of them are very hot liquids. They are available in various shapes and sizes dependent on what they're required for. Since the product that goes through these is different so are the steel bars and seamless tubes that every place will need.
The steel bars and
seamless tubes are manufactured in a plant. They're made up of raw
materials and made especially based upon what the customer’s
requirements are. Many of these go through a non-destructive testing
to make sure they are in working order before they are sent out to
their customers. Companies specially order these plus they are
designed to order. The manufacturer ensures they're made just as
specified.
There are several
plants across the world that offer these steel bars and seamlesstubes. All items can be produced to your specifications. They may be
cut as you need and in random lengths. They can even be chrome
plated, zinc plated, deburred and pre galvanized if this is what you
require. Your first step would be to contact one of the manufacturers
that provide these. Have a chat with one of the experienced members
of staff there and tell them what you need. First ensure they are
able to supply you with the product that you need. When explaining to
them what you need they should be able to offer you advice as well if
needed. Bear in mind this is something they do all the time and have
thorough understanding of their product. Then find out prices and how
long shipping will take.
If you are new at
ordering steel bars and seamless tubes it may be a smart idea to
check a few places out first. After that you can do a comparison of
the places you checked out. See which ones provide you with the best
turnaround and the best rate. Also determine if they give reduced
prices for bulk orders, most places will happily do this if asked.
There are lots of companies available online that does this kind of
work. They are very trustworthy companies that have been supplying
products for many years. Make sure you take a look at them as well to
ensure you are getting the best offer you can.
Natalie Eastaugh the
Internet Marketing Specialist for JDRWebsites.co.uk
In order to learn more
on <a ref="http://www.unionsteel.co.uk”> seamless tubes
</a> in addition to details about Union Steel, visit
unionsteel.co.uk
Thursday 1 September 2011
Our Social Networking
Using the social networking sites, Facebook and Twitter, has allowed me to become a resource for others through providing a platform for me to refer and recommend my seamless tubes and pre-galvanised steel products and laser steel cutting services. The regularly updated contents provide an ongoing view of my company online, which is important in enhancing the social aspect of my company, which brings out an emotional connectivity between my customers and me. On top of this, using social networking sites has made the global market more accessible, and made it easier to share information and ideas with similar businesses. Follow us on Twitter and Facebook for latest updates!
Friday 26 August 2011
Steel Cutting
| |
| Union Steel can fulfil all of your specialist steel cutting requirements and offer customers exceptional and industry proven quality. Our experienced engineers use the latest technology to produce the best possible results for all of our clients both large and small, and we always ensure quality control is maintained at each stage of the processes. Union Steel keep in stock many sizes of tube, these tubes come in various sizes and comprise the following three elements. 1) Outside diameter 2) The wall thickness 3) The length The standard stock length is normally 6.1mtrs (20 feet) and this is the only element that can be changed by cutting. We sub-contract our steel cutting so we have access to a variety of equipment giving both large capacity and capability, our standard tolerance on cut lengths is +/- 0.5mm (tighter tolerances can be offered) subject to the size and length being cut but this can be changed to suit our customers’ requirements. In the majority of cases the tubes once cut can be deburred, this is the removal of the rough edges at the ends of the tubes caused by the steel cutting process, this is achieved either by brush deburring or vibro deburring. For further information regarding our cutting services please feel free to contact us. |
Sunday 21 August 2011
Steel Cutting
| |
Union Steel can fulfil all of your specialist steel cutting requirements and offer customers exceptional and industry proven quality. Our experienced engineers use the latest technology to produce the best possible results for all of our clients both large and small, and we always ensure quality control is maintained at each stage of the processes. Union Steel keep in stock many sizes of tube, these tubes come in various sizes and comprise the following three elements. 1) Outside diameter 2) The wall thickness 3) The length The standard stock length is normally 6.1mtrs (20 feet) and this is the only element that can be changed by cutting. We sub-contract our steel cutting so we have access to a variety of equipment giving both large capacity and capability, our standard tolerance on cut lengths is +/- 0.5mm (tighter tolerances can be offered) subject to the size and length being cut but this can be changed to suit our customers’ requirements. In the majority of cases the tubes once cut can be deburred, this is the removal of the rough edges at the ends of the tubes caused by the steel cutting process, this is achieved either by brush deburring or vibro deburring. For further information regarding our cutting services please feel free to contact us. |
Friday 12 August 2011
ERW Steel Tube Stockist
We stock ERW Steel Tube in more than 200 sizes of round, square, rectangle and flat sided oval. Our range also includes seamless tubes, pre-galvanised steel, structural hollow section, mild steel bar, Flat and angle. All items can be supplied in random lengths and cut lengths - deburred, also zinc plated, chrome plated and pre-galvanised finishes are available. Stock items normally delivered next day and collections are always welcome.  The company started in 2004 and, as an ISO 9001 Registered Firm, we are now big enough to cope but small enough to care. We look forward to receiving your enquiries. http://www.unionsteel.co.uk |
Monday 8 August 2011
What Are Seamless Tubes
Seamless tubes and steel bars are used for many different things. They are quite often used in the exchange of liquids. A variety of liquids will flow through these tubes and bars. Many of them will be extremely hot fluids. They come in all different sizes and shapes depending on what they are needed for. Since the product that goes through these is different so are the seamless tubes and steel bars that each place will need.
The seamless tubes and steel bars are manufactured in a plant. They are made from raw materials and made specifically according to what the customer’s needs are. All of these go through a non-destructive testing to ensure they are working properly before they are sent out to their customers. Companies specially order these and they are made to order. The manufacturer makes sure they are made exactly as specified.
There are numerous plants all over the world that provide these seamless tubes and steelbars. All items can be made to your specifications. They can be in random lengths and cut as you need. They can also be deburred, zinc plated, chrome plated and pre galvanized if this is what you require. Your first step would be to contact one of the manufacturers that provide these. Talk to one of the experienced people there and let them know what you need. First make sure they can provide you with the product that you need. When explaining to them what you need they may be able to provide you with advice as well if needed. Keep in mind this is something they do all the time and have thorough knowledge of their product. Then find out prices and how long shipping will be.
If you are new at ordering seamless tubes and steel bars it may be a good idea to check a few places out first. You can then do a comparison of the places you checked out. See which ones offer you the best rate and the best turnaround. Also check to see if they give discounts for bulk orders, most places will do this if asked. There are many companies available on the internet that does this kind of work. They are very reputable companies that have been supplying products for years. Make sure to check them out as well to make sure you are getting the best deal you can.
Natalie Eastaugh is the Internet Marketing Specialist for JDRWebsites.co.uk
If you wish to find out more on <a ref="http://www.unionsteel.co.uk”> seamless tubes </a> as well as information about Union Steel, go to unionsteel.co.uk
Thursday 21 July 2011
What Are Seamless Tubes
Seamless tubes and steel bars are used for many different things. They are quite often used in the exchange of liquids. A variety of liquids will flow through these tubes and bars. Many of them will be extremely hot fluids. They come in all different sizes and shapes depending on what they are needed for. Since the product that goes through these is different so are the seamless tubes and steel bars that each place will need.
The seamless tubes and steel bars are manufactured in a plant. They are made from raw materials and made specifically according to what the customer’s needs are. All of these go through a non-destructive testing to ensure they are working properly before they are sent out to their customers. Companies specially order these and they are made to order. The manufacturer makes sure they are made exactly as specified.
There are numerous plants all over the world that provide these seamless tubes and steel bars. All items can be made to your specifications. They can be in random lengths and cut as you need. They can also be deburred, zinc plated, chrome plated and pre galvanized if this is what you require. Your first step would be to contact one of the manufacturers that provide these. Talk to one of the experienced people there and let them know what you need. First make sure they can provide you with the product that you need. When explaining to them what you need they may be able to provide you with advice as well if needed. Keep in mind this is something they do all the time and have thorough knowledge of their product. Then find out prices and how long shipping will be.
If you are new at ordering seamless tubes and steel bars it may be a good idea to check a few places out first. You can then do a comparison of the places you checked out. See which ones offer you the best rate and the best turnaround. Also check to see if they give discounts for bulk orders, most places will do this if asked. There are many companies available on the internet that does this kind of work. They are very reputable companies that have been supplying products for years. Make sure to check them out as well to make sure you are getting the best deal you can.
Natalie Eastaugh is the Internet Marketing Specialist for JDRWebsites.co.uk
If you wish to find out more on <a ref="http://www.unionsteel.co.uk”> seamless tubes </a> as well as information about Union Steel, go to unionsteel.co.uk
Friday 8 July 2011
Quality Pre-Galvanised Steel Offers Protection Against Corrosion
Galvanising is a highly effective and economical way of protecting a variety of steel articles, both industrial and commercial, from corrosion. In this process, zinc is deposited onto a steel surface, which creates a layer to protect against corrosion of the steel base that is being coated. Before this zinc deposition, the steel sheets are cleaned with sulphuric acid and fluxed with ammonium chloride. Pre-galvanised steel is a process where steel is galvanised as a sheet, before it is formed into a product and not after the product is created.
Pre-galvanised steel fulfils several commercial and industrial needs. This can be anything from galvanised roofing, siding roofing nails and other fasteners, beams, sidings, utility poles, fencing and a whole lot of general agricultural and industrial components.
Use of pre-galvanised steel is not a new happening, as this process dates back to the mid 19th century, but it has come to become important in construction ever since the 1950s. However, initially, these steel sheets used to be passed through a coating pot, and dipped into molten zinc by hand. But with the huge advances in technology, easier and more efficient techniques are being used today, to facilitate mass production of high-quality pre-galvanised steel.
There is an outstanding history of using pre-galvanised steel for protection from damage caused by atmospheric, soil and water environments. Decades of using steel products created through this process shows us that the pre-galvanisation treatment is a very effective means of preventing damage.
There are many reasons it is found to be desirable in construction:
- Provides corrosion resistance
- Prevents coating degradation
- Helps with colour retention
- Offers better formability
- Costs less
Pre-galvanised steel is used by construction companies as panels in roofing and siding. It is used in utility poles in the electricity lines and also as automobile body panels. In fact, this form of steel can be used by any application that needs galvanic protection because of mechanical damage.
Today, pre-galvanised steel materials are considered to be the industry benchmark. Everyone from contractors to engineers to architects use this form of steel to design a variety of structures; including buildings, parking lots, sports stadiums, shopping malls, parks and everything else that uses steel.
There are many manufacturers of pre-galvanised steel in the market, but using one that gives importance to quality-control goes a long way in ensuring the structures you create using this steel last long and do what they are supposed to – protect from damage. Everything from the aluminium content to the quality of the galvanising zinc bath makes a difference on the appearance, thickness and protection from rust formation of the steel sheets. Good companies ensure they follow international standards.
pre-galvanised steel
Wednesday 29 June 2011
Important Structural Steel Cutting Techniques Everyone Should Be Aware Of
Those people who are involved with some areas of manufacturing know that steel cutting is extremely essential. It isn’t enough to be aware of the need for precise steel cutting in many industrial processes but it's equally vital to note that it needs to be done by specialists to achieve proficiency and accuracy. There are many tactics and techniques which are typically employed while cutting steel however the technique selected in almost any particular steel structural cutting depends on the sort of steel being used and the desired end product.
There are lots of handheld devices that are utilized in steel cutting but it is important to quickly point out that many people presently use many electronic applications while cutting steel. Some of the significant steel cutting techniques includes although not restricted to the below:
Laser steel cutting is generally utilized in some major industrial processes. This consists of using extremely high-powered laser beam to cut or pierce the steel structure under consideration. Using laser be am to slice steel helps to produce very neat melting together with the exact point which is needed without warping the steel. This typically leaves very clean edge in the steel structure. Fusion steel cutting, which is also referred to as melt and blow is a laser beam steel cutting technique that uses high-pressure gas to blow molten steel away from the cutting point. A different laser steel cutting technique that is quite popular is the reactive cutting. This is when the high-power laser beam is utilized as oxygen torch to slice or design desired shapes out of steel materials. The very fact remains that laser steel cutting techniques are frequently more specific compared to the average mechanical steel cutting method.
A different prominent steel cutting technique which is used to slice steel while working in occupied buildings for example office buildings, hospitals or hotels is the abrasive high-pressure water jets. This is mostly utilized in such premises since the water gas can't cause any form of vibrations that might adversely alter the pieces of equipment inside the building while tasks are in progress. Additionally, it doesn’t have slag, dust or gas as left over. This steel cutting technique can also be utilized in occupied buildings which is quite noiseless as opposed to laser and plasma steel cutting techniques. Abrasives including silica sand are mostly utilized to create the needed cut in the steel although not before high-pressure plunger pumps are used to push-up the water and the tiny abrasive particles. It is extremely simple to control or adjust the abrasive water high-pressure water jet steel cutting process to professionally cut any necessary shapes or angles inside the steel material or structure.
Friday 10 June 2011
Laser Cutting
Laser cutting is (as explained by it’s name) a sort of technology where a laser is utilized to cut materials and it is regularly applied within the industrial manufacturing sector (for instance for the cutting of flat sheet materials in addition to the materials to be used for piping and structural purposes). However, laser cutting has become more and more employed by small businesses, hobbyists and also secondary schools as part of the D.T. (Design Technology) curriculum. In simple terms this method functions by directing (through the use of a computer) the output of a high power laser at the material that needs to be cut. This material is consequently burned, melted, vaporized or even blown away by a jet of gas, inducing the material being having an edge with a high quality surface finish.
There are 3 main kinds of lasers which may be useful for the process of laser cutting, with some being more desirable for specific purposes than others. The CO2 laser, for example, are the best option for the processes of boring, cutting, engraving and scribing and perhaps they are employed for the cutting of numerous materials in the industrial sector (such as aluminium, stainless steel, titanium along with paper, wood, fabrics and even wax!). Neodymium (Nd) lasers on the other hand can be used for boring and for processes where high energy but low repetition is required. The 3rd type of laser, neodymium yttrium-aluminium-garnet (Nd-YAG), is most used for processes needing extremely high levels of power and for boring and engraving, resulting in this type of laser being primarily employed for scribing and cutting metals and ceramics. However, all three laser types are ideal for use within the entire process of welding.
The process of laser cutting could be thought to have many perks over other ways of ‘cutting’. For example, when compared to ‘mechanical cutting’ (relating to the by using power-driven machine tools such as drill presses, lathes and saws either by human ‘machinists’ or via Cad), laser cutting has advantages such as easier work holding and increased precision as the laser beam does not get worn-out with time. Also as laser cutting involves merely a very small heat-affected zone, there's less potential for materials warping whilst being cut in this manner. Laser cutting can also be more precise and more energy-efficient for the effective cutting of sheet metal compared to the use of ‘plasma cutting’ (involving the use of a plasma torch).
What Are Seamless Tubes
Seamless tubes and steel bars are used for many different things. They are quite often used in the exchange of liquids. A variety of liquids will flow through these tubes and bars. Many of them will be extremely hot fluids. They come in all different sizes and shapes depending on what they are needed for. Since the product that goes through these is different so are the seamless tubes and steel bars that each place will need.
The seamless tubes and steel bars are manufactured in a plant. They are made from raw materials and made specifically according to what the customer’s needs are. All of these go through a non-destructive testing to ensure they are working properly before they are sent out to their customers. Companies specially order these and they are made to order. The manufacturer makes sure they are made exactly as specified.
There are numerous plants all over the world that provide these seamless tubes and steel bars. All items can be made to your specifications. They can be in random lengths and cut as you need. They can also be deburred, zinc plated, chrome plated and pre galvanized if this is what you require. Your first step would be to contact one of the manufacturers that provide these. Talk to one of the experienced people there and let them know what you need. First make sure they can provide you with the product that you need. When explaining to them what you need they may be able to provide you with advice as well if needed. Keep in mind this is something they do all the time and have thorough knowledge of their product. Then find out prices and how long shipping will be.
If you are new at ordering seamless tubes and steel bars it may be a good idea to check a few places out first. You can then do a comparison of the places you checked out. See which ones offer you the best rate and the best turnaround. Also check to see if they give discounts for bulk orders, most places will do this if asked. There are many companies available on the internet that does this kind of work. They are very reputable companies that have been supplying products for years. Make sure to check them out as well to make sure you are getting the best deal you can.
Natalie Eastaugh is the Internet Marketing Specialist for JDRWebsites.co.uk
If you wish to find out more on <a ref="http://www.unionsteel.co.uk”> seamless tubes </a> as well as information about Union Steel, go to unionsteel.co.uk
Friday 3 June 2011
Important Structural Steel Cutting Techniques
Those people who are involved with several areas of manufacturing realize that the use of steel cutting is extremely important. It just isn't is not sufficient to be familiar with the necessity for precise steel cutting in several industrial processes but it's equally essential to remember that this must be created by experts to get accuracy and proficiently. There are many approaches and methods which are generally applied whilst cutting steel any type of steel however the technique selected in almost any specific steel structural cutting depends upon the sort of steel being used and also the required product.
There are numerous handheld devices which are utilized in steel cutting but it's vital that you quickly point out that lots of people presently use numerous digital applications whilst slicing steel. A few of the key steel cutting techniques includes although not restricted to the below:
Laser Steel Cutting
Laser steel cutting is usually utilized in a number of key industrial processes. Laser steel cutting involves using extremely high-powered laser beam to slice or pierce the steel structure under consideration. Using laser be am to slice steel helps you to create very neat melting together with the exact point that's required without warping the steel. This generally leaves a very clean edge within the steel structure. Fusion steel cutting, and that is referred to as melt and blow is a laser beam steel cutting technique which uses high-pressure gas to blow molten steel out of the cutting point. An alternative laser steel cutting technique that is quite popular is the reactive cutting. This is where the high-power laser beam is utilized as oxygen torch to slice or design desired shapes out of steel materials. The very fact remains that laser steel cutting techniques are often more specific compared to the typical mechanical steel cutting method.
An alternative prominent steel cutting technique which is used to slice steel while doing work in occupied buildings for example office buildings, hospitals or hotels is the abrasive high-pressure water jets. This is usually utilized in places such as this since the water gas can't cause any type of vibrations that may adversely affect the pieces of equipment within the building while tasks are happening. Additionally, it doesn’t have slag, dust or gas remaining. This steel cutting technique can also be utilized in occupied buildings since it is quite noiseless in contrast to laser and plasma steel cutting methods. Abrasives including silica sand are mainly utilized to create the needed cut in the steel although not before high-pressure plunger pumps are utilized to push-up water along with the tiny abrasive particles. It is extremely simple to control or adjust the abrasive water high-pressure water jet steel cutting process to professionally cut any necessary shapes or angles inside the steel material or structure.
Natalie Eastaugh is the Internet Marketing Specialist for JDRWebsites.co.uk
If you would like to get more information on <a href="http://www.unionsteel.co.uk"> laser steel cutting</a> in addition to information about Union Steel, go to unionsteel.co.uk
Monday 30 May 2011
Vital Structural Steel Cutting Techniques You Should Know
Those who are involved in some aspects of production know that steel cutting is very essential. It isn’t enough to be aware of the need for steel cutting in many industrial processes but it is equally just as important to note that it needs to be done by professionals for proficiency and accuracy. There are several ways and techniques that are usually employed while cutting steel but the method chosen in any particular structural cutting depends on the type of steel and the desired end product.
There are lots of handheld devices that are used in steel cutting but it is important to quickly mention that many people presently use many computerized applications while cutting steel. Some of the major steel cutting techniques includes but not limited to the following:
Laser Steel Cutting
Laser steel cutting is mostly used in some major industrial processes. This entails using very high-powered laser beam to cut or pierce the steel structure in question. Using laser be am to slice steel helps to produce very neat melting at the exact point that is needed without warping the steel. This usually leaves very clean edge in the steel structure. Fusion steel cutting, which is also known as melt and blow is a laser beam steel cutting technique that uses high-pressure gas to blow molten steel away from the cutting point. Another laser steel cutting technique that is that's quite popular is the reactive cutting. This is when the high-power laser beam is used as oxygen torch to cut or design desired shapes out of steel materials. The fact remains that laser steel cutting techniques are usually more precise than the average mechanical steel cutting technique.
Another prominent steel cutting technique that is used to cut steel while working in occupied buildings such as office buildings, hospitals or hotels is the abrasive high-pressure water jets. This is mostly used in such premises because the water gas doesn’t cause any form of vibrations that might adversely alter the equipments in the building while work is in progress. It also doesn’t have slag, dust or gas as left over. This steel cutting technique is also used in occupied buildings because it is quite noiseless unlike laser and plasma steel cutting techniques. Abrasives such as silica sand are mostly used to create the needed cut in the steel but not before high-pressure plunger pumps are employed to push up the water and the tiny abrasive particles. It is quite easy to adjust or control the abrasive water high-pressure water jet steel cutting process to effectively cut any required shapes or angles in the steel material or structure.
Natalie Eastaugh is the Internet Marketing Specialist for JDRWebsites.co.uk
If you would like to get more information on <a href="http://www.unionsteel.co.uk"> laser steel cutting</a> in addition to information about Union Steel, go to unionsteel.co.uk
Friday 20 May 2011
Crucial Structural Steel Cutting Techniques
Those people who are involved in several aspects of production realize that steel cutting is extremely essential. It just isn't is not sufficient to be aware of the need for steel cutting in several industrial processes but it's equally just as important to note that it needs to be created by professionals for proficiency and accuracy. There are many approaches and methods that are normally employed whilst cutting steel any type of steel but the technique chosen in almost any specific structural cutting depends upon the sort of steel being used and the required product.
There are lots of handheld devices that are utilized in steel cutting but it's important to quickly point out that many people presently use many digital applications whilst slicing steel. Some of the significant steel cutting techniques includes but not limited to the below:
Laser steel cutting is mostly used in some key industrial processes. This entails using very high-powered laser beam to slice or pierce the steel structure under consideration. Using laser be am to slice steel helps you to create very neat melting together with the exact point which is required without warping the steel. This generally leaves a very clean edge in the steel structure. Fusion steel cutting, which is also known as melt and blow is a laser beam steel cutting technique which uses high-pressure gas to blow molten steel out of the cutting point. Another laser steel cutting technique very popular is the reactive cutting. This is when the high-power laser beam is used as oxygen torch to cut or design desired shapes out of steel materials. The fact remains that laser steel cutting techniques are often more precise than the the typical mechanical steel cutting method.
A different prominent steel cutting technique that is used to cut steel while doing work in occupied buildings such as office buildings, hospitals or hotels is the abrasive high-pressure water jets. This is mostly utilized in such premises because the water gas can't cause any form of vibrations that might adversely affect the equipments within the building while tasks are in progress. Additionally, it doesn’t have slag, dust or gas as left over. This steel cutting technique is also used in occupied buildings which is quite noiseless compared with laser and plasma steel cutting methods. Abrasives including silica sand are mainly used to create the needed cut in the steel although not before high-pressure plunger pumps are employed to push-up the water and the tiny abrasive particles. It is extremely easy to adjust or control the abrasive water high-pressure water jet steel cutting process to professionally cut any required shapes or angles inside the steel material or structure.
Tuesday 17 May 2011
Critical Structural Steel Cutting Techniques You Ought To Know
Those people who are involved with some aspects of manufacturing realize that steel cutting is very essential. It isn’t sufficient to be familiar with the need for precise steel cutting in several industrial processes but it is equally essential to note that it must be done by professionals for accuracy and proficiently. There are several tactics and techniques that are normally employed while cutting steel but the technique chosen in almost any particular structural cutting depends upon the type of steel being used and the desired product.
There are numerous handheld devices which are utilized in steel cutting but it's important to quickly mention that many people presently use many electronic applications whilst slicing steel. Some of the significant steel cutting techniques includes but not restricted to the below:
Laser steel cutting is usually used in some major industrial processes. Laser steel cutting consists of using extremely high-powered laser beam to slice or pierce the steel structure under consideration. Using laser be am to slice steel helps you to produce very neat melting at the exact point that's required without warping the steel. This normally leaves very clean edge in the steel structure. Fusion steel cutting, which is also referred to as melt and blow is a laser beam steel cutting technique which uses high-pressure gas to blow molten steel out of the cutting point. Another laser steel cutting technique that is quite popular is the reactive cutting. This is where the high-power laser beam is utilized as oxygen torch to slice or design desired shapes out of steel materials. The very fact remains that laser steel cutting techniques are usually more precise compared to the average mechanical steel cutting technique.
Another prominent steel cutting technique that is used to slice steel while doing work in occupied buildings such as office buildings, hospitals or hotels is the abrasive high-pressure water jets. This is mostly used in places such as this since the water gas can't cause any type of vibrations that might adversely alter the equipments in the building while work is in progress. It also doesn’t have slag, dust or gas as left over. This steel cutting technique can also be used in occupied buildings since it is quite noiseless compared with laser and plasma steel cutting techniques. Abrasives such as silica sand are mostly used to create the needed cut in the steel although not before high-pressure plunger pumps are utilized to push up water and the tiny abrasive particles. It is extremely simple to control or adjust the abrasive water high-pressure water jet steel cutting process to effectively cut any required shapes or angles inside the steel material or structure.
Friday 6 May 2011
Vital Structural Steel Cutting Techniques You Should Know
Those who are involved in some aspects of production know that steel cutting is very essential. It isn’t enough to be aware of the need for steel cutting in many industrial processes but it is equally vital to note that it needs to be done by professionals for proficiency and accuracy. There are several ways and techniques that are usually employed while cutting steel but the method chosen in any particular structural cutting depends on the type of steel and the desired end product.
There are lots of handheld devices that are used in steel cutting but it is important to quickly mention that many people presently use many computerized applications while cutting steel. Some of the major steel cutting techniques includes but not limited to the following:
Laser steel cutting is mostly used in some major industrial processes. This entails using very high-powered laser beam to cut or pierce the steel structure in question. Using laser beam to cut steel helps to produce very neat melting at the exact point it is needed without warping the steel. This usually leaves very clean edge in the steel structure. Fusion steel cutting, which is also known as melt and blow is a laser beam steel cutting technique that uses high-pressure gas to blow molten steel away from the cutting point. Another laser steel cutting technique that is quite popular is the reactive cutting. This is when the high-power laser beam is used as oxygen torch to cut or design desired shapes out of steel materials. The fact remains that laser steel cutting techniques are usually more precise than the average mechanical steel cutting technique.
Another prominent steel cutting technique that is used to cut steel while working in occupied buildings such as office buildings, hospitals or hotels is the abrasive high-pressure water jets. This is mostly used in such premises because the water gas doesn’t cause any form of vibrations that might adversely alter the equipments in the building while work is in progress. It also doesn’t have slag, dust or gas as left over. This steel cutting technique is also used in occupied building because it is quite noiseless unlike laser and plasma steel cutting techniques. Abrasives such as silica sand are mostly used to create the needed cut in the steel but not before high-pressure plunger pump are employed to push up the water and the tiny abrasive particles. It is quite easy to adjust or control the abrasive water high-pressure water jet steel cutting process to effectively cut any required shapes or angles in the steel material or structure.
Thursday 21 April 2011
Vital Structural Steel Cutting Techniques You Should Know
Those who are involved in some aspects of production know that steel cutting is very essential. It isn’t enough to be aware of the need for steel cutting in many industrial processes but it is equally vital to note that it needs to be done by professionals for proficiency and accuracy. There are several ways and techniques that are usually employed while cutting steel but the method chosen in any particular structural cutting depends on the type of steel and the desired end product.
There are lots of handheld devices that are used in steel cutting but it is important to quickly mention that many people presently use many computerized applications while cutting steel. Some of the major steel cutting techniques includes but not limited to the following:
Laser Steel Cutting
Laser steel cutting is mostly used in some major industrial processes. This entails using very high-powered laser beam to cut or pierce the steel structure in question. Using laser beam to cut steel helps to produce very neat melting at the exact point it is needed without warping the steel. This usually leaves very clean edge in the steel structure. Fusion steel cutting, which is also known as melt and blow is a laser beam steel cutting technique that uses high-pressure gas to blow molten steel away from the cutting point. Another laser steel cutting technique that is quite popular is the reactive cutting. This is when the high-power laser beam is used as oxygen torch to cut or design desired shapes out of steel materials. The fact remains that laser steel cutting techniques are usually more precise than the average mechanical steel cutting technique.
Another prominent steel cutting technique that is used to cut steel while working in occupied buildings such as office buildings, hospitals or hotels is the abrasive high-pressure water jets. This is mostly used in such premises because the water gas doesn’t cause any form of vibrations that might adversely alter the equipments in the building while work is in progress. It also doesn’t have slag, dust or gas as left over. This steel cutting technique is also used in occupied building because it is quite noiseless unlike laser and plasma steel cutting techniques. Abrasives such as silica sand are mostly used to create the needed cut in the steel but not before high-pressure plunger pump are employed to push up the water and the tiny abrasive particles. It is quite easy to adjust or control the abrasive water high-pressure water jet steel cutting process to effectively cut any required shapes or angles in the steel material or structure.
Wednesday 20 April 2011
Quality Pre-Galvanised Steel Offers Protection Against Corrosion
Galvanising is a highly effective and economical way of protecting a variety of steel articles, both industrial and commercial, from corrosion. In this process, zinc is deposited onto a steel surface, which creates a layer to protect against corrosion of the steel base that is being coated. Before this zinc deposition, the steel sheets are cleaned with sulphuric acid and fluxed with ammonium chloride. Pre-galvanised steel is a process where steel is galvanised as a sheet, before it is formed into a product and not after the product is created.
Pre-galvanised steel fulfils several commercial and industrial needs. This can be anything from galvanised roofing, siding roofing nails and other fasteners, beams, sidings, utility poles, fencing and a whole lot of general agricultural and industrial components.
Use of pre-galvanised steel is not a new happening, as this process dates back to the mid 19th century, but it has come to become important in construction ever since the 1950s. However, initially, these steel sheets used to be passed through a coating pot, and dipped into molten zinc by hand. But with the huge advances in technology, easier and more efficient techniques are being used today, to facilitate mass production of high-quality pre-galvanised steel.
There is an outstanding history of using pre-galvanised steel for protection from damage caused by atmospheric, soil and water environments. Decades of using steel products created through this process shows us that the pre-galvanisation treatment is a very effective means of preventing damage.
There are many reasons it is found to be desirable in construction:
- Provides corrosion resistance
- Prevents coating degradation
- Helps with colour retention
- Offers better formability
- Costs less
Pre-galvanised steel is used by construction companies as panels in roofing and siding. It is used in utility poles in the electricity lines and also as automobile body panels. In fact, this form of steel can be used by any application that needs galvanic protection because of mechanical damage.
Today, pre-galvanised materials are considered to be the industry benchmark. Everyone from contractors to engineers to architects use this form of steel to design a variety of structures; including buildings, parking lots, sports stadiums, shopping malls, parks and everything else that uses steel.
There are many manufacturers of pre-galvanised steel in the market, but using one that gives importance to quality-control goes a long way in ensuring the structures you create using this steel last long and do what they are supposed to – protect from damage. Everything from the aluminium content to the quality of the galvanising zinc bath makes a difference on the appearance, thickness and protection from rust formation of the steel sheets. Good companies ensure they follow international standards.
Subscribe to:
Posts (Atom)